Plasser Australia - Machines - Combination tamping

Tamping Machine

Unimat 09-32/4S

Universal tamping machine for track and switches
Continuous travel, cyclic tamping during maintenance of plain track and far into the areas of switches
Treatment of switches using three rail lifting and four rail tamping
Four independent tamping units with a total of 32 tamping tines
The outer tamping units on each side are positioned on telescopic jibs and can be driven out for tamping the fourth rail
Lifting and lining unit with lifting hooks and roller clamps
Automatic supplementary lifting device for lifting the third rail
Cabin at the front with driver's desk and ALC automatic guiding computer
Cabin over the lifting and lining unit when working in switches
Cabin in the middle with workplace for the track maintenance operations
Cabin at the rear with driver's desk
Sweeper unit for track and switches with reversible transverse conveyor belt

Technical Data

Total mass	132 t

Length over buffers	33,150 mm

Bogie centres (tamping machine)	17,500 mm

Engine power	567 kW

Travelling speed under own power/towed, max.	100/120 km/h

Drawing

0932unimat4s.wmv

Unimat 09-32/4S